Q ADAPT
ON-EAR

User Manual

App Download

Apple iOS Android
Or search 'Libratone' in Apple App Store or Google Play to download App

Button And Inteface Instruction

① Power Button  ② Function Button  ③ Line-in  ④ Charging Indicator Light  ⑤ Charging Port

Charging Port

The charging light breathes when charging and is solid on when fully charged

Line-in

When the audio cable is plugged in Bluetooth connection will be disabled

Bluetooth Connection

1.Power on

Long press the power button until the Nightingale is lit on right ear-cup

2.Enter Bluetooth Pairing Mode

The headphone will enter Bluetooth pairing mode automatically during the first run, this is indicated by a side-to-side sequence on the top
*Press the Function Button for 2 seconds to enter Bluetooth pairing mode

3.Select Product

Find and select your Libratone Q ADAPT On Ear in the Bluetooth device list of your phone

4.Connected

The lights will blink twice when connected. The headphone is ready to play!

Basic Operation

① Touch Interface  ② Status Indicator Lights

Volume Control

Rotate your finger clockwise or counterclockwise along the touch interface to adjust volume

Playback and talk control

Multi fingers tap the touch interface to
play & pause / answer & end a call
Double tap to next song
Long press to enable siri/reject call(when headphone and iOS device connected with Bluetooth)

HUSH

Pause the music and hear the world by covering the touch interface with the palm of your hand - repeat to resume playback
* Multi fingers tap, more accurate and easier to operate

CityMix™ noise control

Short press the function button to adjust CityMix™ noise control level

Battery Indicator

Tap the power button to check battery level when turned on

Status Indication

The Nightingale

Lit at 100% when playing, lit at 50% when paused
Breathing when no connection
Blinking when incoming call

Bottom Light

Continuous blinking when low battery
Triple blinking when battery is too low to be powered on
* By default, the lights will get off automatically when the headphone is put on. Change this setting in App

Plus 1

Plus 1 Setup

Enter the headphone page in App, click 'PLUS 1' icon at the bottom, follow the instruction to complete the connection
You can play music synchronously on two connected headphones

FAQ

Playback is interrupted?

Normally, the working distance is 10m at a non-sheltered area. If the distance to the playing device is more than 10m the music playback will be interrupted

The headphone cannot connect to the phone paired before

If you can't connect, please delete the headphone from the Bluetooth device list in the phone, press the Function Button for 2 seconds to enter Bluetooth pairing mode and then pair with the phone again

I have two phones, and want to connect to the same headphone

If the headphone have been previously paired with the two phones, just select the headphone from the Bluetooth device list in the phone to connect

The headphone will automatically power off if no operation/playback is detected

Without power supply, the headphone will automatically power off if no operation/playback is detected within 15 minutes to save power

* Phone, tablet, computer or any other device with Bluetooth are all applicable
This User Manual takes a phone as an example for operation instruction

Product Specification

Product Name Libratone Q ADAPT
Product Model LTP300
Speaker 2*40mm
Sensitivity 102dB@1mW,1kHz
Frequency Response Range 20~20kHz
Active Noise Canceling 30dB (Max)
Audio Input Bluetooth, Line-in
Playing Time 20hours
Charging Time <3hours
Weight 215g